The powerful avancon "3-in-1" power supply in a crossbar, protected, invisible, easy to assemble.
1. Its first simply
a crossbeam in the construction
with the variable length of the
internal conveyor width.
2. Its second the Power Supply for
up to 20 avancon brush-less DC Motors at 40 W /48 V in the avancon ZPC-conveyor system or at 24 V everywhere.
3. Its third the current supply for the avancon ZPC-Control Concept, based on ASi field-bus. It fulfils the safety requirements of PELV (Protective
Extra Low Voltage)
It is patented in most industrialized countires worldwide
Everything
is within this frame-
work, completely closed
and hidden. It does not
bother anyone and is
very safe.
But incredible power-
ful! .For all zpa-
conveyors.
The Power-Supply E601: for 12 to 15 brush-less DC-Motors of 48 V.
Up to 20 Motors can be served with one Power-Supply "3-in-1" at 24 V for the In addition, there is the small board E603 which can be put on the main board for the supply of DC-current of about 30.5 V for the ASi-field-bus. Up to 124 slaves/sensors or actuators can be connected.
For the Input of 110 /240 V there are two plugs on the other side, one for the brush-less Motors (black cable) and one for the ASi Bus (yellow cable). If the additional board is plugged in, the cables can be easily fixed without any tools.
You will save
all your small cabinets,
which you have to place in distances of 4 to 6 m along
the conveyor line by having
a clean and straight wiring
in your conveyors.
As you see above, you can use this avancon"3-in -1" Power Supply also in your own existing conveyor frame construction, even if it is completely different from the avancon ZPC-system. (It is available also for 24 V, suitable for up to 20 motors). We sell it complete installed in the Aluminum Profile in every required length.
AVANCON SA
Via Campagna 27
CH-6595 Riazzino /Switzerland
phone: +41 (0)91 222 10 10
e-mail: relations(at)avancon.com